COWON
 

FIRMWARE

FIRMWARE    |     MANUAL    |     FAQ/QnA

Firmware/Software

PLENUE V Firmware V1.10

2018-07-09 15:34:13

Close

창닫기

PLENUE V Firmware V1.10
POINT Warning/Caution
The battery must be fully charged before firmware upgrade.
Do not reset PLENUE V during firmware upgrade.
Backup any important files in PLENUE V to your PC before firmware upgrade.
Please use firmware that COWON authorizes only.
JetEffect values might be initialized after firmware upgrade. Please record any important values.
EDIT New features
- Supports DSD File (Native DSD) *
- Playback Speed control function added
- Hearing Protection Settings added (Settings/System/Hearing Protection) **
- Support album image file cover.png
- Browser search performance upgrade
- FLAC file compatibility upgrade
- User Interface alternation
- Initialization of volume value when returning to basic set-up.
* Supports DSF/DFF/SACD files formation to DSD 64/128
Since it is a Native DSD method, while playing DSD, JetEffect will not be applied
** This is a function used to set the function on/off on whether to reset the volume when
earphones are removed from the device for hearing protection. This Hearing Protection
Setting is only possible when the country is set to countries other than EU countries.
DOWNLOAD Firmware Download
PLENUE V Firmware V1.10 Download
GO
UPGRADE INSTRUCTIONS How to Install Firmware
Before Installation
1
Unzip the latest firmware provided by COWON and save it in any folder in your PC.

2
Please connect your PLENUE V directly to the USB port on your PC with the cable that is provided.

3
The battery of a device must be fully charged.



1
After downloading the firmware file (PLENUEV_1.10.zip), unzip it (PLENUE_V_FW.BIN, PLENUE_V_RS.BIN).
2
Turn on PLENUE V and connect it to a PC by a USB cable.
3
Copy and paste the two files (PLENUE_V_FW.BIN, PLENUE_V_RS.BIN) to the root folder of PLENUE V.
4
Right-click on the icon [Safely Remove Hardware] in the tray at the lower right corner of the screen to disconnect the device from the PC.
5
First of all, please make sure PLENUE V is turned off. Then, press a power button of the device. Firmware upgrade process will be shown on the screen followed by PLENUE V's automatic turning off. Please turn on the device again.
6
Firmware version is can be checked at settings > system > information.
NO SECTION MODEL SUBJECT DATE
589 PLENUE PLENUE S PLENUE S Firmware V1.20 2017/05/23
582 PLENUE PLENUE D PLENUE D Firmware V1.17 2016/12/27
601 AutoCapsule AQ2 Auto Capsule AQ2 Firmware V1.1.0 2017/12/26
608 PLENUE PLENUE V PLENUE V Firmware V1.10 2018/07/09
604 PLENUE PLENUE M PLENUE M Firmware V1.30 2018/03/20
597 PLENUE PLENUE 1 PLENUE 1 Firmware V2.21 2017/08/29
575 AutoCapsule AW2 Auto Capsule AW2 Firmware V2.5.0 2016/09/08
549 AutoCapsule AW2 Auto Capsule AW1-AW2 PC Manager V1.3.3 2015/05/15
LIST 검색 검색