PLENUE 2 Mark II Firmware V2.30
POINT
Warning/Caution
The battery must be fully charged before firmware upgrade.
Do not reset PLENUE 2 Mark II during firmware upgrade.
Backup any important files in PLENUE 2 Mark II to your PC before firmware upgrade.
Please use firmware that COWON authorizes only.
JetEffect values might be initialized after firmware upgrade. Please record any important values.
EDIT
New features
- Fixed AI data error occurring when deleting files.
- Improved FLAC file compatibility.
- Improved ALAC file compatibility.
- Improved DSF last frame playback.
- Fixed errors occurring when certain corrupted melon files are played.
DOWNLOAD
Firmware Download
PLENUE 2 Mark II Firmware V2.30 Download
UPGRADE INSTRUCTIONS
How to Install PLENUE 2 Mark II Firmware V2.30
1
After downloading the firmware file (PLENUE_2_x.xx), unzip it (PLENUE_2_FW, PLENUE_2_FW_key).
2
Turn on PLENUE 2 Mark II and connect it to a PC by a USB cable.
3
Copy and paste the two files (PLENUE_2_FW, PLENUE_2_FW_key) to the root folder of PLENUE 2 Mark II.
4
Right-click on the icon [Safely Remove Hardware] in the tray at the lower right corner of the screen to disconnect the device from the PC.
5
First of all, please make sure PLENUE 2 Mark II is turned off. Then, press a power button of the device. Firmware upgrade process will be shown on the screen followed by PLENUE 2 Mark II's automatic turning off. Please turn on the device again. There would be two times of firmware upgrade.
6
When PLENUE 2 Mark II turns off again after showing a 'Success' message on the screen, turn on the device again.
7
Firmware version is can be checked at settings > system > information.
