Firmware
2013-07-12 17:36:20
Auto Capsule AW1 Firmware V2.0.0
Auto Capsule AW1 Firmware V2.0.0
Warning/Caution
Back up every important data in a memory card before firmware upgrade;
Save important files in the memory card in another storage device.
It is recommended to use SD Formatter 4.0 for SD/ SDHC/ SDXC to format a memory card.
If recordings are not saved, or there are errors during operation frequently,
format the memory card. AW1 can format a memory card by itself.
(Please refer to AW1 manual).
Memory cards are consumables. Regular checks and replacement are necessary.
Do not shut down a car engine or detach the power jack before AW1 completes firmware upgrade.
Upgrade AW1 with the firmware COWON Systems, Inc. provides only
Improvements
- Motion Sensor Sensitivity extended to nine steps.
- Additional setting of Use Parking Recording Voltage 1)
- Additional setting of Use Auto Shutdown Voltage 2)
- Additional setting of Change to Parking Recording Interval 3)
- Additional setting of GPS Speed Unit (mph) 4)
- Additional setting of Language of Voice Guide 5)
- Additional way of Settings Initialization 6)
- Improved function of GPS speed display.
1) Settings > Recording > Parking Recording > Voltage Settings > Use Parking Recording Voltage
If you do not use Parking Recording Voltage, change to Parking Recording is determined by only
cars movement
2) Settings > Recording > Parking Recording > Voltage Settings > Use Auto Shutdown Voltage
Auto Shutdown Voltage Setting is a function to prevent battery discharge. In general, setting Use
Auto Shutdown Voltage is recommended
3) Settings > Recording > Parking Recording > Change to Parking Recording Interval
4) Settings > Video > ETC > Speed Unit
5) Settings > Audio > Voice Instructions > Language of Voice Guide
6) Settings > Audio > Settings Initialization
Firmware Download
AW1 Firmware V2.0.0 Download 
Ways to wireless firmware update via Smart Manager
Download the latest Firmware
- Touch 'MENU' button from STORAGE tab when the phone is connected to 3G or Wi-Fi internet Download
the latest firmware
- Settings Check for firmware update
Firmware Installation on AW1
Settings Install the latest firmware on AW1(Firmware upgrade begins when AW1 restarts)
- Touch 'MENU' button from STORAGE tab when the phone is connected to 3G or Wi-Fi internet Download
the latest firmware
- Settings Check for firmware update
Firmware Installation on AW1
Settings Install the latest firmware on AW1(Firmware upgrade begins when AW1 restarts)
How to Install AW1 Firmware V2.0.0
Detach the power jack connected to AW1, and take out the memory card when LED indicator fades off completely
Connect the memory card to a PC using a memory card reader.
Unzip the firmware file first. After this, copy and paste all the files to the root folder of the memory card.
When files are copied, take out the memory card after conducting safely remove hardware
Insert the memory card into unplugged AW1.
Start the ignition first, and then connect a power jack to AW1. Firmware upgrade will begin.
Do not turn off the ignition and keep a power jack connection during upgrade.
When upgrade completed, AW1 will be rebooted with Voice Guide, "Starting driving recording."
Please make sure to use the latest version of Smart Manager and PC Manager all the time.
Useful Programs
Memory Card Formatter - SD Formatter 4.0 for SD/SDHC/SDXC
Auto Capsule AW1 PC Manager V1.1.8
Smart Manager
Language Change of Voice Guide