[ Digital Pride COWON ]

COWON J3 Firmware V2.23

Warning/Caution

The battery must be fully charged before upgrading firmware.

Do not press the reset button during upgrading.

Backup any important files to your computer before upgrade.

You must upgrade the supplied firmware from COWON SYSTEMS.

Music mode

- Support ID3 tags of APE files.

- Support album art which is in extension header of WMA file.

- Support ID3 tags that have asynchronous flag of ID3.

System

- Fixed the error that m3u files were not recognized correctly when SD card was inserted.

- Fixed the error that external speaker volume was changed when < Pan > setting was adjusted.

- Fixed the error that inserted SD card was not recognized after removing SD card which was

not supported.

- Fixed the error that SD card was not recognized in MTP mode when device was connected to

PC with SD card inserted.

COWON J3 Firmware V2.23 Download

Please read notes before install the firmware.

1. Unzip the latest firmware provided by COWON.COM and save it in any folder in your PC.

2. Please connect your COWON J3 directly to the USB port on your PC with the cable that provided

3. The battery must be fully charged.

After unzip the firmware file, select all files in the firmware folder and right click to copy.

Connect COWON J3 to the PC by USB cable.

When connection is made, paste the firmware files to the root folder of the device..

Click [Safely Remove Hardware] icon in the tray at the lower right corner of your computer screen to disconnect the device from the PC.

Make sure the COWON J3 is turned off and then turn on the device. COWON J3 will automatically start firmware upgrade.

2.23

You will be able to check version of firmware on settings > system > information.