[ Digital Pride COWON ]

View Article

COWON

iAUDIO Expert

09-06-2009 17:27:41

COWON D2+ Firmware V2.11

COWON D2+ Firmware V2.11

You will be able to check version of firmware in Settings > system > information after firmware upgrade is completed.

When you install this firmware in your device, you won’t lose the data in your device.
However, please back up your data in case of loss.


	- Fixed the error of BBE+ sound in firmware version 2.10. - Fixed the error that some album arts of MP3 files are not displayed.

COWON D2+ Firmware V2.11

	Please read notes before install the firmware.
	1. Unzip the latest firmware provided by COWON.COM and save it in any folder. 2. Please connect your COWON D2+ directly to the USB port on your computer with the cable we provide when you are upgrading firmware. 3. The battery must be charged enough or full

	Download the firmware to your PC and unzip it. You will get D2N_P.bin, D2N _P_RS.bin,
	and D2N_P_FT.bin files.

Connect COWON D2+ to the PC by using an USB cable and wait until your computer recognizes

COWON D2 as a removable disk.

If COWON D2+ is recognized as a removable disk, please paste D2N_P.bin, D2N _P_RS.bin,

and D2N_P_FT.bin files to the root folder (top folder in COWON D2+) in COWON D2+.

After copy is finished, please disconnect COWON D2+ from the PC and turn on the unit. COWON D2+ will

automatically start firmware upgrade with firmware upgrade progress bar. After upgrade is completed,

the device will be turned off automatically.

Now turn on COWON D2+. The upgraded firmware version will be displayed on the first screen.

If the new firmware version number is the same, firmware upgrade is completed.


	You will be able to check version of firmware on settings > system > information.

	The battery must be fully charged before upgrading firmware.
	Do not turn the power off during upgrading.
	Backup any important files to your computer before upgrade.
	You must upgrade the supplied firmware from COWON SYSTEMS.